In addition to CAPI surveys on Android tablets, Survey Solutions provides two distinct possibilities:
- Interviewing: Interviewers conduct interviews using the web interface (without a tablet);
- Self-enumeration: Respondents fill out interviews in the browser.
The difference is essential:
In the first case the person filling out the interview is a known member of the team, has an account created in the system, assigned to a team of a certain supervisor and so on. We use this mode when e.g. we set up a call centre and our interviewers don’t physically travel to the respondent, so don’t need a mobile device (tablet) or to work offline (disconnected), but collect multiple interviews and report to a certain supervisor;
In the second case, the respondent doesn’t have an account in the system, and could in general be anonymous, and typically only one interview in the survey is filled out by each respondent.
This article is dedicated to the discussion of the second case, the setup of the web survey for self-enumeration. The first case is described in details in the topic dedicated to the web-interviewer.
Advantages and disadvantages
Web enumeration has numerous advantages to the face-to-face interviewing:
- doesn’t require interviewers, their training and travel time;
- doesn’t require interviewer equipment (tablets) as data entry will be performed by the respondent using his/her device;
- the whole survey can be faster (theoretically can be completed within a day);
- some sensitive questions may be easier to answer in the absence of interviewer;
- it may be possible to reach respondents, which would otherwise be not reachable (for example, those living in remote places, or conflict areas).
There are equally-important concerns:
it may be difficult for a respondent to fully understand the survey and complete a complex questionnaire without guidance of an interviewer, who has had some training on the topic;
survey coordinator must be able to contact respondents to invite them to take a survey (for example, per email);
respondents must have access to and be able to use a device (computer/tablet/smartphone) with internet access.
A survey coordinator should carefully weight the costs and the benefits, as well as estimate the impact of the mode of collection on the quality of data. Web-interviewing may introduce an essential bias into the data stemming from self-selection on the basis of age, literacy, IT-literacy, income, etc.
In many cases the self-enumeration is used as a supplementary tool to face-to-face interviewing in an attempt to reach the representative audience in a cost-effective manner.
Setting up a CAWI survey
Conducting a CAWI survey requires the following:
- Compose the questionnaire.
- Import the questionnaire to the data server.
- Make web-assignments for the survey.
- Activate the web-survey mode.
- Distribute the links.
- Review incoming data/follow up with the respondents if necessary.
- De-activate the web-survey mode.
Below we discuss these steps in more detail.
1. Composing the questionnaire
There is hardly any difference in the questionnaire for the web interviews. You can generally use the same questionnaire that you use for the face-to-face interviews also for the web interviews, but it is worth to:
Explain the structure of the questionnaire to the respondent and give an idea about how to navigate through the modules;
Check the wording of the questions - without the interviewers some things may be not clear, explain them in the instructions;
Check the error messages - they must be clear to the respondent. Remember that the respondent wouldn’t have the training session that the interviewers typically get before the survey, so the questionnaire must be more ‘user-friendly’.
2. Importing the questionnaire
There is no difference of this step relative to importing the questionnaire for a face-to-face interviewing. Note that if you import a different version of the same questionnaire to the data server, the web mode for it (step #4) will need to be activated again, specifically for each version.
3. Make web-assignments
Once you import the questionnaire, you will need to create web-assignments. They are just like the regular assignments, but the following properties are important or exist only for web-assignments:
|_webmode||Web mode||A simple boolean flag that is raised if the assignment is intended to be completed directly by the respondent. In the preloading file 1 corresponds to web mode, and zero or not specified value corresponds to no web mode for the assignment.|
|_email||Email address of the respondent (optional)|
|_password||Password||if a password (optional) is specified, interviews based on this assignment will be protected by the password, which also needs to be communicated to the prospective respondents of the survey. See below on password rules.|
|_responsible||Responsible person||Account of the person responsible for the assignment.|
|_quantity||Quantity||Number of interviews that may be generated from this assignment; -1 corresponds to unlimited amount.|
In addition to the above properties, the web assignments have all the properties of the regular assignments. So that we can, for example, specify the values for identifying questions (fields). The email and password only make sense for the web mode assignments and are not effective for the regular assignments. The values of all of these properties can be seen in the corresponding columns of the table showing the assignments (Menu: Survey Setup → Assignments).
For a CAWI survey, set the value of _webmode to 1 for all assignments. For a mixed survey, only for those assignments that must be filled out by the respondents through the web.
Even though the CAWI survey is done through a self-enumeration (by the respondent) the person responsible for the assignment must be specified and be in the role of interviewer. A web assignment will not be created if it is made in the name of a user in a different role and you will get a corresponding error message.
The combination of the assignment’s quantity, email and password will determine the overall protocol of the survey.
When the email is specified during the assignment creation, the Survey Solutions can utilize one of the bulk email delivery services to deliver the invitations for the survey. If these services have not been configured yet, the headquarters user must contact the server administrator, as such configuration requires administrator’s access level.
Typical setup for a public opinion survey - one link is made public
through any media (newspaper, TV, website). All visitors of the link
will have an opportunity to fill out an interview.
If the bulk email delivery service has been set up, at the start of the interview they will have a possibility to enter their email, so that they will receive a link to follow in case their session is interrupted and they need to continue the started interview.
There is no limit to the number of interviews to be collected.
||Typical setup for a non-public survey of unknown audience, for example, visitors to a conference. The password must be made available to them (e.g. written on the board, or announced to them). The role of the password is to separate this group from all the other people who are not exposed and not the focus of the study. There is no limit to the number of interviews to be collected.|
||Typical for monitoring surveys - the same respondent must authenticate himself/herself with the password, and can submit an unlimited number of interviews (presumably regulated by the established protocol: daily, weekly, monthly, etc, or when a particular event happens, such as a patient arrives with a particular symptom).|
Typical for private opinion surveys - the respondents are invited directly
and can submit only one interview. To start the interview they must
follow the link and confirm their access with the issued password.
The interview may be completed in multiple seatings. If the respondent interrupts the interview, he/she can continue by clicking the same link received in the original invitation.
||Similar to the above, but the respondents do not need to enter the password to start their interviews, just click on their personalized links.|
||Typical for private opinion surveys - the respondents can submit only
one interview. To start the interview they must follow the link and
confirm their access with the issued password.
The interview may be completed in multiple seatings. If the respondent interrupts the interview, he/she can continue by clicking the original link. The passwords must be unique in this case, and the link distributed using alternative means.
||This combination is not acceptable.|
Same as the case above where quantity is -1, except that the number of
responses is not infinite, but is limited to N interviews.
First N respondents will start the interviews, other respondents will get a message indicating their participation is no longer needed.
4. Activate the web-survey mode.
Once the assignments are created the survey coordinator needs to activate the web mode of data collection for the survey. This is available by calling the context menu for the questionnaire in the Survey Setup: Menu → Survey Setup → Web interview setup.
At the next page the template messages for invitations/reminders/notifications may be edited and the web mode activated (the green START button) or deactivated (the red STOP button). Any generated links remain ineffective when the survey is not in the web mode.
5. Deliver links
Depending on the scenario of the survey as outlined by the table in step #3, you will have one or multiple links to be delivered to the respondents. Note that in any of the cases, Survey Solutions doesn’t send the invitations/notifications directly, but utilizes a special bulk email delivery service to deliver the corresponding messages. Refer to the corresponding article on how to set it up. Once it is set up, one can go to Menu → Survey Setup → click the questionnaire name → Send invitations to send out the invitation emails.
If this service is not set up by the server administrator, then it is his/her responsibility to distribute the appropriate messages among the respondents using any alternative tools. The links can be downloaded by going to Menu → Survey Setup → click the questionnaire name → Download web links
After the links have been sent to the respondents it is important not to change the responsible person for an assignment to anyone except an interviewer as this will invalidate it (you will get a warning if you try). Note that this may be an unintended indirect consequence of your actions, such as relocating an interviewer to another team leaving his assignments in the original team.
6. Review incoming data
Once a CAWI survey is running, the interviews will appear in the list as soon as they are started. The respondents may still be working at them and their status will be InterviewerAssigned. This status is only attributable to CAWI interviews. Any interviews received from tablets will show up on the server already in the Completed status.
The supervisors are expected to review as soon as possible the interviews in the status Completed, and either to approve or reject them.
Note that even though there is a rejection notification template in the set of user-configurable notification templates for a survey, rejection notifications are NOT sent out at all, and the supervisor will need to manually reallocate the rejected interview to a real interviewer to follow up with the respondent by using phone (see CATI) or other communication.
7. De-activate the web survey mode.
When all the web assignments are completed or you’ve acquired the minimal desired number of responses, you can stop the web survey. When the web survey is stopped no changes will be permitted by the respondents visiting any links, whether to create new or finish started interviews.CAWI password rules -----------------------
The password used for CAWI assignments must:
- consist of only upper case English letters and digits;
- be at least 6 characters long.
Providing a single question mark ‘?’ instead of the password will request Survey Solutions to automatically generate one compliant with the above rules.
Some web interviews may be quite lengthy, difficult to fill out in one seating either because of the respondent not being available for so long, or because of the connectivity issues.
To continue working on the interview the respondent must open exactly the same URL he/she sees during the interviewing. This URL may be different from the one contained in the originally received invitation. The respondent may copy and preserve the URL from his/her browser’s address line at any time. In addition, if the bulk email service is set up by the server administrator, the user will be asked for the contact email at the beginning of the interview. If the email is provided, a message containing the continuation link will be sent to that email. If the server administrator wants to disable this feature, he/she should uncheck the corresponding option in the ‘Web interview Settings’.
This setting is shared by all CAWI surveys on the same server.